Chapitre 72 — Fer et acier
100 codes SH-6
7201.10
— Iron; non-alloy pig iron containing by weight 0.5% or less of phosphorus, in pigs, blocks or other primary forms
7201.20
— Iron; non-alloy pig iron containing by weight more than 0.5% of phosphorus, in pigs, blocks or other primary forms
7201.50
— Iron; alloy pig iron; spiegeleisen, in pigs, blocks or other primary forms
7202.11
— Ferro-alloys; ferro-manganese, containing by weight more than 2% of carbon
7202.19
— Ferro-alloys; ferro-manganese, containing by weight 2% or less of carbon
7202.21
— Ferro-alloys; ferro-silicon, containing by weight more than 55% of silicon
7202.29
— Ferro-alloys; ferro-silicon, containing by weight 55% or less of silicon
7202.30
— Ferro-alloys; ferro-silico-manganese
7202.41
— Ferro-alloys; ferro-chromium, containing by weight more than 4% of carbon
7202.49
— Ferro-alloys; ferro-chromium, containing by weight 4% or less of carbon
7202.50
— Ferro-alloys; ferro-silico-chromium
7202.60
— Ferro-alloys; ferro-nickel
7202.70
— Ferro-alloys; ferro-molybdenum
7202.80
— Ferro-alloys; ferro-tungsten and ferro-silico-tungsten
7202.91
— Ferro-alloys; ferro-titanium and ferro-silico-titanium
7202.92
— Ferro-alloys; ferro-vanadium
7202.93
— Ferro-alloys; ferro-niobium
7202.99
— Ferro-alloys; n.e.c. in heading no. 7202
7203.10
— Ferrous products; obtained by direct reduction of iron ore, in lumps, pellets or similar forms
7203.90
— Ferrous products; spongy ferrous products and iron having a minimum purity by weight of 99.94%, in lumps, pellets or similar forms
7204.10
— Ferrous waste and scrap; of cast iron
7204.21
— Ferrous waste and scrap; of stainless steel
7204.29
— Ferrous waste and scrap; of alloy steel (excluding stainless)
7204.30
— Ferrous waste and scrap; of tinned iron or steel
7204.41
— Ferrous waste and scrap; turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles
7204.49
— Ferrous waste and scrap; n.e.c. in heading no. 7204
7204.50
— Ferrous products; remelting scrap ingots
7205.10
— Iron or steel, pig iron, spiegeleisen; granules thereof
7205.21
— Alloy steel powders
7205.29
— Iron or steel, pig iron, spiegeleisen; powders (excluding alloy steel)
7206.10
— Iron or non-alloy steel; ingots (excluding iron of heading no. 7203)
7206.90
— Iron or non-alloy steel; primary forms (excluding ingots and iron of heading no. 7203)
7207.11
— Iron or non-alloy steel; semi-finished products of iron or non-alloy steel; containing by weight less than 0.25% of carbon, of rectangular (including square) cross-section, width less than twice thickness
7207.12
— Iron or non-alloy steel; semi-finished products of iron or non-alloy steel; containing by weight less than 0.25% of carbon, of rectangular (other than square) cross-section
7207.19
— Iron or non-alloy steel; semi-finished products of iron or non-alloy steel, containing by weight less than 0.25% of carbon, other than rectangular or square cross-section
7207.20
— Iron or non-alloy steel; semi-finished products of iron or non-alloy steel, containing by weight 0.25% or more of carbon
7208.10
— Iron or non-alloy steel; in coils, flat-rolled, of a width 600mm or more, hot-rolled, with patterns in relief
7208.25
— Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, pickled, of a thickness of 4.75mm or more
7208.26
— Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, pickled, of a thickness of 3mm or more but less than 4.75mm
7208.27
— Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, pickled, of a thickness of less than 3mm
7208.36
— Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness exceeding 10mm
7208.37
— Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness of 4.75mm or more but not exceeding 10mm
7208.38
— Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness of 3mm or more but less than 4.75mm
7208.39
— Iron or non-alloy steel; in coils, without patterns in relief, flat-rolled, of a width 600mm or more, hot-rolled, of a thickness of less than 3mm
7208.40
— Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, with patterns in relief
7208.51
— Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness exceeding 10mm
7208.52
— Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness of 4.75mm or more but not exceeding 10mm
7208.53
— Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness of 3mm or more but less than 4.75mm
7208.54
— Iron or non-alloy steel; (not in coils), flat-rolled, of a width 600mm or more, hot-rolled, without patterns in relief, of a thickness of less than 3mm
7208.90
— Iron or non-alloy steel; flat-rolled, hot-rolled, of a width 600mm or more, n.e.c. in heading no. 7208
7209.15
— Iron or non-alloy steel; in coils, flat-rolled, width 600mm or more, cold-rolled, of a thickness of 3mm or more
7209.16
— Iron or non-alloy steel; in coils, flat-rolled, width 600mm or more, cold-rolled, of a thickness exceeding 1mm but less than 3mm
7209.17
— Iron or non-alloy steel; in coils, flat-rolled, width 600mm or more, cold-rolled, of a thickness of 0.5mm or more but not exceeding 1mm
7209.18
— Iron or non-alloy steel; in coils, flat-rolled, width 600mm or more, cold-rolled, of a thickness of less than 0.5mm
7209.25
— Iron or non-alloy steel; (not in coils), flat-rolled, width 600mm or more, cold-rolled, of a thickness of 3mm or more
7209.26
— Iron or non-alloy steel; (not in coils), flat-rolled, width 600mm or more, cold-rolled, of a thickness exceeding 1mm but less than 3mm
7209.27
— Iron or non-alloy steel; (not in coils), flat-rolled, width 600mm or more, cold-rolled, of a thickness of 0.5mm or more but not exceeding 1mm
7209.28
— Iron or non-alloy steel; (not in coils), flat-rolled, width 600mm or more, cold-rolled, of a thickness of less than 0.5mm
7209.90
— Iron or non-alloy steel; flat-rolled, width 600mm or more, cold-rolled, n.e.c. in heading no. 7209
7210.11
— Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with tin, thickness of 0.5mm or more
7210.12
— Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with tin, thickness of less than 0.5mm
7210.20
— Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with lead, including terne-plate
7210.30
— Iron or non-alloy steel; flat-rolled, width 600mm or more, electrolytically plated or coated with zinc
7210.41
— Iron or non-alloy steel; flat-rolled, width 600mm or more, corrugated, plated or coated with zinc (not electrolytically)
7210.49
— Iron or non-alloy steel; flat-rolled, width 600mm or more, (not corrugated), plated or coated with zinc (not electrolytically)
7210.50
— Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with chromium oxides or with chromium and chromium oxides
7210.61
— Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with aluminium zinc-alloys
7210.69
— Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with aluminium, other than plated or coated with aluminium zinc-alloys
7210.70
— Iron or non-alloy steel; flat-rolled, width 600mm or more, painted, varnished or coated with plastics
7210.90
— Iron or non-alloy steel; flat-rolled, width 600mm or more, plated or coated with materials n.e.c. in heading no. 7210
7211.13
— Iron or non-alloy steel; flat-rolled, hot-rolled, rolled on four faces or in a closed box pass, of a width more than 150mm but less than 600mm, 4mm thick or more, not in coils, without patterns in relief
7211.14
— Iron or non-alloy steel; flat-rolled, hot-rolled, of a width less than 600mm, 4.75mm thick or more, excluding those of item no. 7211.13
7211.19
— Iron or non-alloy steel; flat-rolled, hot-rolled, of a width less than 600mm, less than 4.75mm thick, excluding those of item no. 7211.13
7211.23
— Iron or non-alloy steel; flat-rolled, cold-rolled, of a width less than 600mm, containing by weight less than 0.25% of carbon
7211.29
— Iron or non-alloy steel; flat-rolled, cold-rolled, of a width less than 600mm, containing by weight 0.25% or more of carbon
7211.90
— Iron or non-alloy steel; flat-rolled, n.e.c. in heading no. 7211, width less than 600mm
7212.10
— Iron or non-alloy steel; flat-rolled, width less than 600mm, plated or coated with tin
7212.20
— Iron or non-alloy steel; flat-rolled, of a width less than 600mm, electrolytically plated or coated with zinc
7212.30
— Iron or non-alloy steel; flat-rolled, width less than 600mm, plated or coated with zinc (not electrolytically)
7212.40
— Iron or non-alloy steel; flat-rolled, width less than 600mm, painted, varnished or coated with plastics
7212.50
— Iron or non-alloy steel; flat-rolled, width less than 600mm, plated or coated, (excluding tin, zinc or plastic)
7212.60
— Iron or non-alloy steel; flat-rolled, width less than 600mm, clad
7213.10
— Iron or non-alloy steel; bars and rods, hot-rolled, in irregularly wound coils, containing indentations, ribs, grooves or other deformations produced during the rolling process
7213.20
— Iron or non-alloy steel; bars and rods, hot-rolled, in irregularly wound coils, of free-cutting steel
7213.91
— Iron or non-alloy steel; bars and rods, hot-rolled, in irregularly wound coils, n.e.c. in heading no. 7213, of circular cross-section measuring less than 14mm in diameter
7213.99
— Iron or non-alloy steel; bars and rods, hot-rolled, in irregularly wound coils, n.e.c. in heading no. 7213, of circular cross-section measuring 14mm or more in diameter
7214.10
— Iron or non-alloy steel; bars and rods, forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling
7214.20
— Iron or non-alloy steel; bars and rods, hot-rolled, hot-drawn or hot-extruded, containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling
7214.30
— Iron or non-alloy steel; bars and rods, hot-rolled, hot-drawn or hot-extruded, including those twisted after rolling, of free-cutting steel
7214.91
— Iron or non-alloy steel; bars and rods, hot-rolled, hot-drawn or hot-extruded, n.e.c. in heading no. 7214, of rectangular (other than square) cross-section
7214.99
— Iron or non-alloy steel; bars and rods, hot-rolled, hot-drawn or hot-extruded, n.e.c. in heading no. 7214, other than of rectangular cross-section
7215.10
— Iron or non-alloy steel; bars and rods, of free-cutting steel, cold-formed or cold-finished, n.e.c. in chapter 72
7215.50
— Iron or non-alloy steel; bars and rods, n.e.c. in chapter 72, cold-formed or cold-finished, (not free-cutting)
7215.90
— Iron or non-alloy steel; bars and rods, n.e.c. in chapter 72, n.e.c. in heading no. 7215
7216.10
— Iron or non-alloy steel; U, I or H sections, hot-rolled, hot-drawn or extruded, of a height of less than 80mm
7216.21
— Iron or non-alloy steel; L sections, hot-rolled, hot-drawn or extruded, of a height of less than 80mm
7216.22
— Iron or non-alloy steel; T sections, hot-rolled, hot-drawn or extruded, of a height less than 80mm
7216.31
— Iron or non-alloy steel; U sections, hot-rolled, hot-drawn or extruded, of a height of 80mm or more
7216.32
— Iron or non-alloy steel; I sections, hot-rolled, hot-drawn or extruded, of a height of 80mm or more
7216.33
— Iron or non-alloy steel; H sections, hot-rolled, hot-drawn or extruded, of a height of 80mm or more